hoses

YOU CHOOSE...

Rubber or braided nylon material

UR-FLEX LP hoses are available in standard rubber

or in braided nylon version.

Braided nylon hoses are more abrasive- and kink resistant.

Standard LP rubber- and braided nylon hoses for scuba diving have an internal diameter of 6 mm (1/4").


UR-FLEX HP hoses are available only in standard rubber.

braided nylon

rubber    braided nylon

The braided nylon UR-FLEX hoses have a polyether inner tube, which is much more resistant to detoriation then the polyester tubes used in hoses from other brands.

Regulator hoses (LP)

Regulator hoses have a standard 9/16'' UNF female fitting on the 2nd stage end and for the 1st stage side there is a choice of 3/8''UNF or 1/2'' UNF male fitting.

 

Most regulator brands use 3/8"UNF threading on their first stages.

Some brands like Mares also use 1/2"UNF.

 

Please double check before ordering.

9/16" UNF female

2nd stage end

        1/2" UNF        3/8" UNF

Inflator/drysuit hoses (LP)

The UR-FLEX inflator hoses have a standard BCD inflator quick release fitting on 1 end and again a choice of 3/8''UNF or 1/2''UNF male fitting for the 1st stage side.

standard BCD

quick release

SPG hoses (HP)

HP scuba hoses for your SPG or console have a standard 7/16 UNF threading on the 1st stage end and a SPG fitting at the other end.

SPGs are fitted on HP scuba hoses by using a HP swivel (not included with the hose).


HP hoses are only available in standard rubber, black color.

Custom length

standard

7/16 UNF male

1st stage end

standard

SPG fitting

You choose the desired length for your hoses in 1 cm increments.

The length is the overall length, connectors included.

Please note that the length is in cm and not inches.

Minimum overall length for all hoses is 14 cm.

Maximum length is 2000 cm.

Choice of colors

Standard rubber (LP and HP) hoses are available only in black.


For braided nylon (LP only) hoses there is a choice of

black, red, yellow, carbon, pink, blue, green, orange.

RED

PINK

ORANGE

YELLOW

BLUE

CARBON (grey-black)

GREEN

Regulator hose with 8 mm (5/16") internal diameter (LP)

Standard LP regulator- and inflator hoses have an internal diameter of 6 mm (1/4").


UR-FLEX offers also LP regulator hoses with an internal diameter of 8 mm 5/16".

These hoses have the standard 3/8 UNF male threading at the 1st stage end and the standard 9/16 UNF female threading at the 2nd stage end.

3/8 UNF male

1st stage end


8mm hose

9/16 UNF female

2nd stage end


8mm hose

Connectors 1/4 NPT and 1/4 G (LP)

For all the standard LP hoses (rubber and braided nylon) with standard internal diameter of 6 mm (1/4") connectors with 1/4 NPT and 1/4 G threading are available. Any combination of these with all the other connectors (male 3/8 UNF, male 1/2 UNF, inflator, female 9/16 UNF) is possible.

These 1/4 NPT and 1/4 G connectors are also chrome plated brass.

1/4 NPT male


6mm hose

1/4 G male


6mm hose

For the rubber LP hoses with internal diameter of 8 mm (5/16") we offer also a connector with 1/4 NPT threading. Any combination of this connector with male 3/8 UNF (1st stage) and female 9/16 UNF (2nd stage) is possible.

These 1/4 NPT connectors are also chrome plated brass.

O-rings

1/4 NPT male


8mm hose

All UR-FLEX hoses come standard with oxygen compatible black Viton O-rings.